Bosch DCN Next Generation Installation And User Instructions Manual page 123

DCN NG | Installation and User Instructions | Section 4 | Installation Accessories
12 Apply dual crimp on the back of the ferrules using
the crimping tool (tool 3). See the next figure.
figure 22. 1 2: Step 12
13 Hook the ferrules into the mounting block. See the
next figure.
figure 22. 1 3: Step 13
Bosch Security Systems | 2004-03 | 9922 141 70521en
14 Snap the socket contacts (of the copper wires) into
the mounting block (the crimp must be at the top).
figure 22. 1 4: Step 14
15 Slide the back housing against the mounting block
with the angled edges to each other. See the next
figure.
figure 22. 1 5: Step 15
en | 123