Lbb4414/00 Fiber Interface; Introduction; Controls, Connectors And Indicators - Bosch DCN Next Generation Installation And User Instructions Manual

DCN NG | Installation and User Instructions | Section 4 | Installation Accessories
19 LBB4414/00 Fiber
Interface
19. 1

Introduction

The fiber interface is used to convert from plastic optical
fiber cable (POF) to glass optical fiber cable (GOF) and
vice versa to cover distances of more than 50 m in the
optical network.
19.2 Controls, connectors and
indicators
The fiber interface (see figure 19.1) contains the
following:
1 External power supply - A connection for an
optional external power supply (see section 19.3.3).
2 Control inputs - for future use.
3 POF socket - A POF socket to connect the fiber
interface to a POF cable (see section 19.3.2).
4 Lid - for future use.
5 Status LED - A yellow status LED that provides
information about the status of the fiber interface
(see section 19.5).
6 Status LED - A green status LED that provides
information about the status of the fiber interface
(see section 19.5).
7 GOF socket - A GOF socket to connect the fiber
interface to a GOF cable (see section 19.3.2).
Bosch Security Systems | 2004-03 | 9922 141 70521en
1 2
7
figure 19. 1 : Exterior of the fiber interface
en | 113
3
4
5
6