1. Brake master cylinder assembly
2. Brake booster assembly
3. Gasket
4. Push rod clevis
Brake Booster
5. Nut
6. Clevis pin
7. Clip
8. Nut
CAUTION:
Never disassemble brake booster. Disassembly will spoil
its original function. If faulty condition is found, replace it
with new one.
REMOVAL
1) Remove master cylinder assembly, referring to "Maser Cylin-
der" in the section.
2) Disconnect brake vacuum hose (2) from booster (1).
3) Remove brake pipes (3).
BRAKES 5-45
9. Brake vacuum hose
Tightening torque