Suzuki Jimny Service Manual page 556

18) Remove heated oxygen sensor bracket from cylinder head
and detach No.1 heated oxygen sensor coupler from its
bracket.
19) Release accelerator cable (1) from clamp (2) (for left hand
steering vehicle only) and disconnect accelerator cable from
throttle body.
20) Remove canister purge hose bracket from intake manifold.
21) Disconnect the following hoses:
• Brake booster hose (3) from intake manifold
• Canister purge hose (4) from EVAP canister purge valve
• Fuel feed and return hoses (5) from each pipe
• Heater inlet and outlet hoses from each pipe
• Vacuum hose (6) (to check valve)
22) Disconnect exhaust pipe (1) from exhaust manifold.
23) Remove clutch housing (torque converter housing for A/T)
lower plate (1).
24) With drive plate locked by using a proper size rod (1) or the
like, remove torque converter bolts (2) (vehicle with A/T).
25) Support transmission. For A/T vehicle, do not jack under A/T
oil pan to support transmission.
ENGINE MECHANICAL (M13 ENGINE) 6A1-75