1B-42 AIR CONDITIONING (OPTIONAL)
INSPECTION
• Check clutch plate and clutch pulley for leaks of compressor
oil.
• Check clutch bearing of compressor pulley for noise, wear
and grease leakage.
• Measure resistance of magnet clutch coil (1) between mag-
net clutch lead wire (2) and compressor body assembly.
If measured resistance is not within tolerance, replace mag-
net clutch coil.
Magnet Clutch coil resistance
: 3.4 – 4.1 Ω at 20 °C (68 °F)
• Check thermal switch (1) for continuity using ohmmeter.
If it is no continuity, replace thermal switch.
REMOVAL
1) Remove compressor from vehicle referring to "Compressor"
in this section.
2) Fix clutch plate (1) with special tool, and remove clutch plate
bolt (2) and washer (3).
Special tool
(A) : 09991-06020
3) Remove clutch plate (1) using special tool.
Special tool
(A) : 09991-06030