Suzuki Jimny Service Manual page 113

3-4 STEERING, SUSPENSION, WHEELS AND TIRES
Condition
Abnormal Noise,
Front End
Wander or Poor
Steering Stability
Erratic Steering when
Braking
Ride Too Soft
Suspension bottoms
Body Leans or Sways
in Corners
Cupped Tires
Possible Cause
Worn, sticky or loose tie rod ends, drug rod ball
joints, king pin bearings or axle shaft joints
Damaged shock absorbers or mountings
Worn leading arm bushings
Worn stabilizer bar bushings
Worn Iateral rod bushings
Loose stabilizer bar
Loose wheel nuts
Loose suspension bolts or nuts
Broken or otherwise damaged wheel bearings
Broken suspension springs
Mismatched or uneven tires
Loose king pin bearings and tie rod ends
Faulty shock absorbers or mounting
Loose stabilizer bar
Broken or sagging springs
Steering gear box not properly adjusted
Front wheel alignment
Worn wheel bearings
Broken or sagging springs
Leaking wheel cylinder or caliper
Warped discs
Badly worn brake linings
Drum is out of round in some brakes
Wheel tires are inflated unequally
Defective wheel cylinders
Disturbed front wheel alignment
Faulty shock absorber
Overloaded
Faulty shocks absorber
Incorrect, broken or sagging springs
Loose stabilizer bar
Faulty shocks absorbers or mounting
Broken or sagging springs
Overloaded
Worn wheel bearings
Excessive tire or wheel run-out
Tire out of balance
Correction
Replace tie rod end, king pin bear-
ing or axle shaft joint.
Replace or repair.
Replace.
Replace.
Replace.
Tighten bolts or replace bushes.
Tighten wheel nuts.
Tighten suspension bolts or nuts.
Replace wheel bearing.
Replace spring.
Replace tire or inflate tires to
proper pressure.
Replace king pin bearing or tie rod
end.
Replace absorber or repair mount-
ing.
Tighten or replace stabilizer bar or
bushes.
Replace spring.
Check or adjust steering gear box
torque.
Check and adjust front wheel align-
ment.
Replace wheel bearing.
Replace spring.
Repair or replace wheel cylinder or
caliper.
Replace brake disc.
Replace brake shoe lining.
Replace brake drum.
Inflate tires to proper pressure.
Replace or repair wheel cylinder.
Check front wheel alignment
Replace shock absorber.
Check loading.
Replace shock absorber.
Replace spring.
Tighten stabilizer bar bolts or
replace bushes.
Replace shock absorber or tighten
mounting.
Replace spring.
Check loading.
Replace wheel bearing.
Replace tire or wheel disc.
Adjust tire balance.