Suzuki Jimny Service Manual page 542

6) Install exhaust manifold stiffener and exhaust pipe referring
to "Exhaust Manifold" in this section.
7) Install camshafts, timing chain and chain cover referring to
"Camshaft, Tappet and Shim", "Timing Chain and Chain
Tensioner" and "Timing Chain Cover" in this section.
8) Install cylinder head cover and oil pan referring to "Cylinder
Head Cover" and "Oil Pan and Oil Pump Strainer" in this sec-
tion.
9) Install intake manifold stiffener and connect each hoses and
electric lead wires securely.
10) Install air cleaner outlet hoses.
11) Install radiator with cooling fan and connect A/T fluid hoses
(vehicle with A/T), radiator inlet and outlet hoses referring to
"Water Pump Belt and Cooling Fan" and "Radiator" in Sec-
tion 6B.
12) Adjust generator belt tension referring to "Water Pump Belt
Tension" in Section 6B.
13) Adjust A/C compressor and/or P/S pump belt tension (if
equipped) referring to "Compressor Drive Belt" in Section 1B
or "Power Steering Belt" in Section 3B1.
14) Adjust accelerator cable play referring to "Accelerator Cable
Adjustment" in Section 6E.
15) Check to ensure that all removed parts are back in place.
Reinstall any necessary parts which have not been rein-
stalled.
16) Refill cooling system with coolant, engine with engine oil and
A/T with specified A/T fluid (vehicle with A/T).
17) Connect negative cable at battery.
18) Verify that there is no fuel leakage, coolant leakage, oil leak-
age, A/T fluid leakage (vehicle with A/T) and exhaust gas
leakage at each connection.
ENGINE MECHANICAL (M13 ENGINE) 6A1-61