ABB IRC5 Product Manual page 130

2 Installation and commissioning
2.9.6 Installing the EPS board DSQC 646 for Electronic Position Switches
Continued
8
9
Continues on next page
130
Action
Fit the axis computer on the EPS board.
Remove the existing Ethernet cable from
the axis computer and connect it to the
EPS board. Connect the short Ethernet
cable between the EPS board and the
axis computer.
© Copyright 2007-2024 ABB. All rights reserved.
Note/illustration
C
xx0900000438
• A: axis computer
• B: EPS board
• C: attachment screws
xx0600003218
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: AB
A
B