ABB IRC5 Product Manual page 210

4 Repair
4.16 Replacement of Safety module DSQC1015 for SafeMove
Continued
2
3
4
5
Refitting the Safety module
1
Continues on next page
210
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before hand-
ling the unit read the safety information in
section The unit is sensitive to ESD on
page 48.
Open the computer unit by removing the
attachment screws and lift off the cover.
Disconnect the fan connector.
CAUTION
Be careful with the fan cable when opening
and removing the upper cover. The fan
cable must not be stretched.
Remove the attachment screw on top of
the slot bracket.
Remove the Safety module by pulling it out
of the socket on the motherboard.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more in-
formation, see Electrical safety on page
© Copyright 2007-2024 ABB. All rights reserved.
Note/Illustration
xx1300000684
A Attachment screws (4 pcs.)
B Cover
xx1500001761
A Attachment screw
B Safety module
CAUTION
Always grip the board around the edges to
avoid damage to the board or its compon-
ents.
Note/Illustration
35.
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: AB
A
B
A
B