Target Data - Mitsubishi Electric MELSEC iQ-R Series User Manual

Target data

Target data is the data which can be laid out on a report.
Target data types
The types of target data are as follows:
Target data types
Data logging
Current value
Creation time
Data logging
Precautions
The following are the considerations when laying out logged data in a report.
■The data logging file format
The data logging file must be in binary file format.
■Record output
If the total number of records in the output source files is less than the specified number of records, only the records that exist
in the output source files will be output.
■When data does not exist in the data logging file
Immediately after switching the programmable controller system ON, if a creation trigger occurs when data does not exist in
the data logging file, an error occurs in the high speed data logger module.
Configure and construct the system so that the creation trigger occurs after data is saved in the data logging file.
Description
The data in a data logging file created with the data logging function can be selected.(Page 49 Save function)
The specified number of records worth of data is read from the data logging file, then output to the report.
Device data of a CPU module at the time when the report was created.
The date and time when the report was created.
Creation time
Current values
1 FUNCTION
71
1.3 Report Function
1