Binary Output - Mitsubishi Electric MELSEC iQ-R Series User Manual

Binary output

Set contents to output to binary files.
This is enabled when "Binary file" is selected in the [File format] tab.
Window
Displayed items
Item
Event name
*1
information
Data name information
Date information
Comment information
*1 File space can be saved by setting to only output the event name to the header and not to the record. In this case, the event name
output to the header can be referred from the event number in the record data.
*2 Data value is rounded to 0.1 millisecond unit when the high speed sampling is specified, and to 100 millisecond unit when the general
sampling is specified.
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
186
2.6 Event Logging Setting
Description
Output the event name Select this to output the list of event name to the header in event number order.
list into the header
Output the event names Select this to output event names that occurred to the record data.
into record data
Output the data name list Select this to output the list of data name used in the event setting to the header.
into the header
In second Select this to output only the date information in seconds unit.
*2
In nanosecond In addition to seconds, select this to output the date information in nanoseconds unit.
Output comment at event Select this to output comments in each record data.
occurrence and
comment at event
restoration into record
data