1.13
FTP Server Function
The FTP server function accesses files in an SD memory card inserted in a high speed data logger module by using an FTP
client from a personal computer.
This function can only be used when the connection method is a connection via a hub.
While using the FTP server function, configure the settings for temporary internet files. (MELSEC iQ-R High Speed Data
Logger Module User's Manual (Startup))
For the supported FTP commands, refer to the following:
Page 353 Supported FTP Command
Operating procedure
1.
Start a web browser from a personal computer, and enter the address of a high speed data logger module (http://
*1
192.168.3.3
).
*1 If the IP address is changed, specify the IP address set in the network settings. (Page 131 Network setting)
2.
Click "Open the list of files (FTP)" from the active screen.
1 FUNCTION
103
1.13 FTP Server Function
1