Module Information List - Mitsubishi Electric MELSEC iQ-R Series User Manual

Module information list

The LED information and switch information can be checked in the [Module Information List] tab.
During a self-diagnostic test, "Automatic hardware is being tested" or "Hardware test for LED check is being executed" is
displayed in all the LED information and switch information.
If an error occurs, refer to the following section to take corrective action.
Page 246 Troubleshooting on LED indication and input/output signals
Window
Item
LED Information RUN
ERR
OPR
CARD RDY
INFO
CARD ACS
Switch Information SD memory card lock switch
Description
The operating status of a module is displayed.
The error status of a module is displayed.
The operating status of a module is displayed.
The status of an SD memory card is displayed.
Information on the module operation is displayed.
The access status of an SD memory card is displayed.
Information on the SD memory card lock switch is displayed.
4 TROUBLESHOOTING
4.2 Checking the Module Status
4
243