Sampling - Mitsubishi Electric MELSEC iQ-R Series User Manual

Sampling

Set a report creation trigger and interval for sampling current value data.
Window
Displayed items
Item

High speed
sampling
Sampling
interval
General sampling 
Sampling
interval
When selecting "High speed sampling", a device to be sampled at high speed needs to be set in the creation
trigger, period, and folder switching timing in the report setting.
When a device to be sampled at high speed is not set, "High speed sampling" is switched to "General
sampling" at the report setting completion, since the current value does not need to be sampled at high speed.
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
194
2.7 Report Setting
Description
Select this to monitor the high-speed report creation triggers and sample current values that
are synchronized with a sequence scan.
Each scan Select this to sample data in each sequence scan.
Time specification Select this to sample data with the specified interval. Specify a sampling interval.
Select this to monitor the report creation trigger and sample the current values that are not
synchronized with a sequence scan.
Time specification Select this to sample data with the specified interval. Specify a sampling interval.
Time interval Select this to sample data with the specified time interval (hour, minute, or second) from
specification exactly midnight everyday, exact hour, or exact minute. Specify the sampling interval and
time unit.