Mitsubishi Electric MELSEC iQ-R Series User Manual page 319

■Error code of access target CPU 1 to 64 (Un\G1530 to 1593)
An error code is stored in the area corresponding to the access target CPU setting where the error is occurring. For details on
the error codes, refer to the following:
Page 261 Error Code List
Data logging status area (Un\G2000 to 2989)
The status related to the data logging function can be checked in this area.
Buffer memory name
Data logging setting information
Data logging execution information
Data logging error information
Number of saved files exceeded
information
Data logging Error code
information 1
Number of
newest folder
Number of
newest file
High speed
sampling failure
count
Processing
overload count
Unprocessed
buffer size
Unprocessed
data count
(current)
Unprocessed
data count
(maximum)
Trigger detection
count
Trigger
reoccurrence
count
Data logging information 2 to 64
■Data logging setting information (Un\G2000 to 2003)
The setting status of a data logging setting is stored.
The bit corresponding to the configured data logging setting turns ON.
0: Unset
1: Set
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
Un\G2000 16 15 14 13 12 11
Un\G2001 32 31 30 29 28 27
48 47 46 45 44 43
Un\G2002
Un\G2003 64 63 62 61 60 59
Address Description
Un\G2000 to 2003 The bit corresponding to the configured data logging setting turns ON.
Un\G2008 to 2011 The bit corresponding to the data logging setting that is executing logging turns ON.
Un\G2012 to 2015 The bit corresponding to the data logging setting where a data logging error is occurring
turns ON.
Un\G2016 to 2019 The information indicating the number of saved files is exceeding the set number of files is
stored.
Un\G2030 An error code is stored in the area corresponding to the data logging setting where the data
logging error is occurring.
0: Normal
Other: Error code
Un\G2031 to 2032 The number of latest folders is stored.
Un\G2033 to 2034 The number of latest files is stored.
Un\G2035 The number of times that the module did not catch up with a high speed sampling is stored.
Un\G2036 The number of times that the data logging processing did not catch up with the data
sampling is stored.
Un\G2037 The buffer size to temporarily accumulate sampled data is stored.
Un\G2038 The current number of units of data accumulated in the unprocessed buffer is stored.
Un\G2039 The maximum number of units of data accumulated in the unprocessed buffer is stored.
Un\G2040 The number of trigger occurrences detected is stored.
Un\G2041 The number of triggers that was ignored due to a trigger recurrence while outputting logging
before and after a trigger is stored.
Un\G2045 to 2989 Details are the same as data logging information 1.
10 9 8 7 6 5 4 3 2
26 25 24 23 22 21 20 19 18
42 41 40 39 38 37 36 35 34
58 57 56 55 54 53 52 51 50
1
17
33
49
APPX
Appendix 3 Buffer Memory
A
317