Creation Trigger - Mitsubishi Electric MELSEC iQ-R Series User Manual

Creation trigger

Set the trigger conditions for report creation.
There are two types of trigger conditions depending on the number of conditions combined.
• Single condition (when the number of conditions is 1)
• Compound condition (if multiple conditions are combined)
Window
Displayed items
Item
Synchronize creation trigger with current value data
Single condition
Compound condition
*1 "At the data logging file switching" can be selected on the "Trigger condition setting" screen.
By configuring the following settings, report files corresponding to data logging files one-to-one basis can be
created.
• Select "Saved file" in "Source file" on the "Data logging layout" screen of the report settings. (Page 199
Data logging layout)
• Select "At the data logging file switching" on the "Trigger condition setting" screen of report settings.
(Page 207 Creation trigger)
By setting the following settings, only trigger logging data before and after the rising of trigger condition can be
output to a report.
• Select "Trigger logging unit" in the [file] tab of the data logging settings.
• Select "Saved file" in "Source file" on the "Data logging layout" screen of the report settings. (Page 199
Data logging layout)
• Select "At the data logging file switching" on the "Trigger condition setting" screen of report settings.
(Page 207 Creation trigger)
Description
Select this to sample creation triggers and current value data simultaneously at all the time from the
access target CPU.
Select this to set a single trigger condition.
The settings are same as mentioned in the following section.
Page 157 Trigger (single condition)
Select this to set a combination of multiple trigger conditions.
The settings are same as mentioned in the following section.
Page 159 Trigger (compound condition)
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
*1
*1
2.7 Report Setting
2
207