Importing Global Labels And Common Device Comments - Mitsubishi Electric MELSEC iQ-R Series User Manual

Importing global labels and common device comments

Import global labels (including module labels) and common device comments set in an engineering tool into a project in
Configuration Tool.
Data imported from global labels are called relation data.
Related devices can be updated corresponding to the changes of global labels in the Engineering tool project.
Applicable data
: Applicable, : Not applicable, : No data
Item
Common device comment
Each program device comment
Global label (Global)
Module label (M+Global)
Local label
System label
For details of global labels and device comments, refer to the following:
GX Works3 Operating Manual
Considerations for importing data
■Importing global label
• Engineering tool (GX Works3 Version 1.020W or later) must be installed to import global labels or update related data.
• Global labels of devices (data types) which cannot be set to Configuration Tool are not imported. (Even though they are
displayed in the list of global labels/common device comments to be imported.)
• When the global labels are set 32769 or more in 1 project, the global labels which exceed 32768 are not displayed in the list
of global labels to be imported.
• Do not import global labels during the save process of an engineering tool project. If attempted, the engineering tool project
may not be stored normally.
• The global label for which devices or labels are not assigned are not in the scope of import.
• GX Works3 projects that require entering a user name and password or cannot be opened in an installed GX Works3
cannot be imported.
■Importing common device comment
• Engineering tool (GX Works3 Version 1.020W or later) must be installed to import common device comments.
• When the common device comments are set 32769 or more in 1 project, the common device comments which exceed
32768 are not displayed in the list of common device comments to be imported.
• Do not import common device comments during the save process of an engineering tool project. If attempted, the
engineering tool project may not be stored normally.
• GX Works3 projects that require entering a user name and password or cannot be opened in an installed GX Works3
cannot be imported.
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
114
2.2 Common Operations
Engineering tool





