3
PARAMETER SETTING
Various operation settings can be set in the parameter setting of an engineering tool.
3.1
Parameter Setting Procedure
1.
Add a high speed data logger module to an engineering tool.
[Parameters] [Module Information] from Navigation window, and right click and select [Add New Module]
2.
Set two types of parameter settings, basic settings and refresh settings, by selecting in the tree in the screen displayed
by the following operation:
[Navigation window] [Parameter] [Module Information] [RD81DL96]
3.
Write the settings to the CPU module with the engineering tool.
[Online] [Write to PLC]
4.
The settings are reflected by resetting the CPU module or turning the power OFF to ON.
3.2
Basic Settings
Configure the various operation settings of the high speed data logger module.
3 PARAMETER SETTING
3.1 Parameter Setting Procedure
3
237