Section 12 - 8X00 engine monitor program
12.1.3 Satellite
data
12.1.4 Function
key tasks
12.2 Installation
12.2.1 Hardware
and software
requirements
12.2.2 Start-up
PAGE 64
PDOP
•
HDOP
•
PRN
•
Azimuth
•
Elevation
•
SNR
•
"*" indicator if used in position calculation
•
The main program screen contains a menu for nine of the keyboard func-
tion keys. Pressing each of the keys tells the program to perform the fol-
lowing tasks:
F1: Initialize the GPS engine
•
F2: Send a "GPS self-test" command to the GPS engine
•
F3: Send a file to the GPS engine
•
F4: Scrolls the GPS data to allow direct message observation
•
F5: Scrolls the beacon monitor port to allow direct message observa-
•
tion
F6: Start a GPS log file
•
F7: Start a BDM log file
•
F8: Send a file to the BDM
•
F10: Quit the program
•
Baud rates are fixed at 4800 (GPS) and 9600 (beacon receiver).
An IBM-compatible PC (386 or faster)
•
The executable file " 8X00MON.EXE "
•
The self-test message file " SELFTEST.ALL "
•
The initialization message file " INITFILE.ALL "
•
In DOS:
1. Copy the contents of the GS8900 software disk ( 8X00MON.EXE and
related files) onto any subdirectory on your hard disk.
2. Change to that directory, then run the program by typing
" 8X00MON ."
In Windows:
1. Click on Start, then Run.
2. Type the path that contains the program, then run the program by
typing " 8X00MON ."
05/01/97 REV H