ABB i-bus KNX Product Manual page 7

ABB i-bus® KNX ABOUT THIS DOCUMENT
1 About this document
1.1 Using the product manual
This manual provides detailed technical information on the function, installation and programming of
the ABB i-bus® KNX device.
1.2 Legal disclaimer
ABB AG reserves the right to make changes to the product or modify the contents of this document
without prior notice.
The agreed properties are definitive for any orders placed. ABB AG does not accept any responsibility
whatsoever for potential errors or possible lack of information in this document.
ABB AG reserves all rights in this document and in the subject matter and illustrations contained therein.
Reproduction, transfer to third parties or processing of the content – including sections thereof – is not
permitted without the prior written consent of ABB AG.
Copyright © 2019 ABB AG
All rights reserved
1.3 Explanation of symbols
1.
2.
ð
►
a)
1)
•
–
Tab. 1: Explanation of symbols
Instructions in specified sequence and result
Individual actions
Priorities
Processes run by the device in a specific sequence
List level 1
List level 2
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 7