ABB i-bus KNX Product Manual page 128

ABB i-bus® KNX PARAMETERS
7.9 Parameter window Shutter Actuator A+B
The parameter windows and the structure of the parameters are identical for all output pairs. There-
fore, only one output pair will be described below by way of example.
If, in Parameter window Switch Actuator A \ Parameter window Functions, the parameter Application
was set to the Switch Actuator option, the Parameter window Shutter Actuator A+B is not visible.
The functions can be set individually for each Shutter Actuator output pair in the Parameter window
Shutter Actuator A+B and the subordinate parameter windows.
If several Shutter Actuator output pairs are to be set to the same values, parameterization can be per-
formed in Parameter window Shutter Actuator template.
7.9.1 Parameter window Functions
The following settings can be made in the Parameter window Functions:
• Selection of application
• Selection of operating mode
• Enabling of functions
Fig. 39: Parameter window Functions
Parameter
• Application
• Operating mode
• Enable function Scenes
• Enable function Safety/Weather alarms
• Enable function Automatic sun protection
Note
Note
Note
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 128