ABB i-bus KNX Product Manual page 123

ABB i-bus® KNX PARAMETERS
—
7.6.1.11
DEPENDENT PARAMETER
Min. duration of the overshoot
This parameter can be used to set how long the value received at the threshold input must exceed the
threshold before the result of the function Threshold is updated.
Options
00:00:00 ... 18:12:15 hh:mm:ss
Condition for visibility:
Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option Threshold
—
7.6.1.12
DEPENDENT PARAMETER
Result if the input value is between the thresholds
This parameter can be used to define the result of the function Threshold when the value received at the
threshold input lies between the upper and lower thresholds. The result can be linked with any output
within the device or output on the group object Result .
Options
Unchanged
1
0
Condition for visibility:
Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option Threshold
—
7.6.1.13
DEPENDENT PARAMETER
Minimum dwell time between the thresholds
This parameter can be used to define how long the value received at the threshold input must remain be-
tween the upper and lower thresholds before the result of the function Threshold is updated.
Options
00:00:00 ... 18:12:15 hh:mm:ss
Condition for visibility:
Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option Threshold
The result of the function Threshold remains unchanged.
The result of the function Threshold is 1.
The result of the function Threshold is 0.
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 123