ABB i-bus KNX Product Manual page 224

ABB i-bus® KNX GROUP OBJECTS
No. Function
25 Change lower threshold
This group object can be used to change the lower threshold.
The data point type for the group object depends on the option selected in the parameter Data type of group object "Threshold input".
Condition for visibility:
• Parameter window Configuration \ Parameter Enable Logic/Threshold X-Y \ Option Yes
• Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option Threshold
Parameter Data type of group object "Threshold input" \ Option Meter pulses (DPT5.010)
•
• Parameter Change thresholds via KNX \ Option Yes
Change lower threshold
25
This group object can be used to change the lower threshold.
The data point type for the group object depends on the option selected in the parameter Data type of group object "Threshold input".
Condition for visibility:
Parameter window Configuration \ Parameter Enable Logic/Threshold X-Y \ Option Yes
•
• Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option Threshold
• Parameter Data type of group object "Threshold input" \ Option Meter pulses (DPT7.001)
Parameter Change thresholds via KNX \ Option Yes
•
Change lower threshold
25
This group object can be used to change the lower threshold.
The data point type for the group object depends on the option selected in the parameter Data type of group object "Threshold input".
Condition for visibility:
• Parameter window Configuration \ Parameter Enable Logic/Threshold X-Y \ Option Yes
Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option Threshold
•
• Parameter Data type of group object "Threshold input" \ Option Temperature (DPT9.001)
Parameter Change thresholds via KNX \ Option Yes
•
25 Change lower threshold
This group object can be used to change the lower threshold.
The data point type for the group object depends on the option selected in the parameter Data type of group object "Threshold input".
Condition for visibility:
• Parameter window Configuration \ Parameter Enable Logic/Threshold X-Y \ Option Yes
Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option Threshold
•
• Parameter Data type of group object "Threshold input" \ Option Lux (DPT9.004)
• Parameter Change thresholds via KNX \ Option Yes
26 Result
This group object can be used to send the result of the function Logic on the ABB i-bus® KNX.
More information → Function Logic, Page 84.
Note
The result of the function Logic can also be internally connected to an output.
Condition for visibility:
Parameter window Configuration \ Parameter Enable Logic/Threshold X-Y \ Option Yes
•
• Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option AND , OR , Exclusive OR , GATE
• Parameter Send result on KNX \ Option Yes
26 Result
This group object can be used to send the result of the function Threshold on the ABB i-bus® KNX.
More information → Function Threshold, Page 85.
Note
The result of the function Threshold can also be internally connected to an output.
Condition for visibility:
Parameter window Configuration \ Parameter Enable Logic/Threshold X-Y \ Option Yes
•
• Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option Threshold
Parameter Send result on KNX \ Option Yes
•
8.6 Group objects Logic/Threshold 2
No. Function
27 ... 30
→ Group objects Logic/Threshold 1, Page 222
8.7 Group objects Logic/Threshold 3
No. Function
31 ... 34
→ Group objects Logic/Threshold 1, Page 222
Group Object Name
Logic/Threshold 1: Threshold
Logic/Threshold 1: Threshold
Logic/Threshold 1: Threshold
Logic/Threshold 1: Threshold
Logic/Threshold 1: Logic
Logic/Threshold 1: Threshold
Group Object Name
Logic/Threshold 2
Group Object Name
Logic/Threshold 3
Data Point Type Length
DPT 5.010 1 byte
DPT 7.001 2 bytes
DPT 9.001 2 bytes
DPT 9.004 2 bytes
DPT 1.011 1 bit
DPT 1.011 1 bit
Data Point Type Length
Data Point Type Length
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 224
Flags
C W
C W
C W
C W
C R T
C W
Flags
Flags