ABB i-bus KNX Product Manual page 138

ABB i-bus® KNX PARAMETERS
—
7.9.2.1.5
DEPENDENT PARAMETER
Reaction after ETS download
This parameter can be used to define the blind/shutter reaction after an ETS download.
Options
No reaction
Up
Down
Stop
Individual position
Activation of automatic sun
protection
Condition for visibility:
Parameter window Basic settings \ Parameter Parameter setting \ Option Individual
—
7.9.2.1.5.1
DEPENDENT PARAMETER
Position height (0 % = top; 100 % = bottom)
This parameter can be used to define the position to which the blind/shutter is moved.
The position will be approached only with deactivated automatic sun protection.
Options
0 ... 100 %
Condition for visibility:
Parameter window Basic settings \ Parameter Parameter setting \ Option Individual \ Parameter Reac-
tion after ETS download \ Option Individual position
—
7.9.2.1.5.2
DEPENDENT PARAMETER
Position slat (0 % = open; 100 % = closed)
This parameter can be used to define the position to which the blind/shutter slats are moved.
The position will be approached only with deactivated automatic sun protection.
This parameter is available only in Operating mode Blind/shutter control with slat adjustment .
Options
0 ... 100 %
Condition for visibility:
Parameter window Basic settings \ Parameter Parameter setting \ Option Individual \ Parameter Reac-
tion after ETS download \ Option Individual position
If the blind/shutter is moving, it will continue until reaching the target position. If the blind/shutter is
at rest, its position will remain unchanged.
The blind/shutter moves to the upper end position
The blind/shutter moves to the lower end position
If the blind/shutter is moving, it will be stopped. If the blind/shutter is at rest, its position will remain
unchanged.
The required positions of the blind/shutter and slats (depending on operating mode) can be defined.
•
•
The function Automatic sun protection is activated.
Note
Position height (0 % = top; 100 % = bottom)
Position slat (0 % = open; 100 % = closed)
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 138