ABB i-bus KNX Product Manual page 178

ABB i-bus® KNX PARAMETERS
7.9.7 Parameter window Status messages
The Parameter window Status messages can be used to enable group objects for status messages and
to define their sending behavior.
If several Shutter Actuator output pairs are to be set to the same values, parameterization can be per-
formed in Parameter window Shutter Actuator template.
Fig. 45: Parameter window Status messages
Parameter
• Parameter setting
• Enable group objects "Status Height/Slat"
• Enable group objects "Status Upper/Lower end pos."
• Enable group object "Status Operability"
• Enable group object "Status Automatic sun protection"
• Enable group object "Status information"
Note
• Send value of group object
• Send value of group object
• Send value of group object
• Send value of group object
• Send value of group object
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 178