ABB i-bus KNX Product Manual page 105

ABB i-bus® KNX PARAMETERS
7.2.1 Enable output X + Y
These parameters can be used to enable the output pairs. The enabled output pairs are configured as
output pairs or as a Switch Actuator or Shutter Actuator in the Parameter window Switch Actuator A or
in the Parameter window Shutter Actuator A+B .
In the interest of a clear ETS structure, parameter windows and group objects of inactive outputs are
hidden.
All outputs are set as Shutter Actuator output pairs in the factory setting.
• In order to use an output pair as Shutter Actuator outputs, open Parameter window Shutter Actua-
Options
No
Yes
7.2.2 Enable Logic/Threshold X-Y
This parameter can be used to enable the Logic and Threshold functions in groups of four.
The logic and threshold functions are configured in Parameter window Logic/Threshold 1.
In the interest of a clear ETS structure, parameter windows and group objects of the inactive logic and
threshold functions are hidden.
The logic and threshold functions can be used independently or linked with an output.
More information → Function Logic, Page 84, → Function Threshold, Page 85.
The default option shown here does not apply to all Logic/Threshold groups.
Options
No
Yes
7.2.3 Maximum number of sent telegrams
This parameter can be used to define the number of telegrams sent within a period that can be set (tele-
gram rate limit).
The bus load generated by the device can be limited using the telegram rate limit. The Limit refers to all
telegrams sent from the device.
Options
1 ... 20 ... 100
Note
tor A+B \ Parameter window Functions and select the following option for the parameter Applica-
tion: Switch Actuator .
The output pair is not enabled.
The output pair is enabled, and the corresponding parameter window with the associated group ob-
jects opens.
Note
The logic and threshold functions are not enabled.
The logic and threshold functions are enabled, and the corresponding parameter window with the as-
sociated group objects opens.
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 105