ABB i-bus KNX Product Manual page 215

ABB i-bus® KNX PARAMETERS
—
7.10.7.1.2.1
DEPENDENT PARAMETER
Scene retrieval additionally via group object
This parameter is available only for scene assignment 1 ... 4.
This parameter can be used to define whether the scene assignment can be retrieved via the group ob-
ject Retrieve scene assignment x as well.
Options
No
Yes
Condition for visibility:
Parameter window Scene assignment \ Parameter Parameter setting \ Option Individual \ Parameter
Enable scene assignment x \ Option Yes
—
7.10.7.1.2.2
DEPENDENT PARAMETER
Scene number
The scene number (1 ... 64) can be created and assigned to the output using this parameter.
Options
1 ... 64
Condition for visibility:
Parameter window Scene assignment \ Parameter Parameter setting \ Option Individual \ Parameter
Enable scene assignment x \ Option Yes
—
7.10.7.1.2.3
DEPENDENT PARAMETER
Delay
This parameter can be used to define the delay with which the associated reaction takes place after
scene retrieval.
The delay can be disabled with the group object Disable delay for switching ON and OFF .
Options
00:00:00 ... 12:00:00 hh:mm:ss
Condition for visibility:
Parameter window Scene assignment \ Parameter Parameter setting \ Option Individual \ Parameter
Enable scene assignment x \ Option Yes
Note
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 215