ABB i-bus KNX Product Manual page 188

ABB i-bus® KNX PARAMETERS
7.10 Parameter window Switch Actuator A
The parameter windows and the structure of the parameters are identical for all outputs. Therefore,
only one output will be described below by way of example.
All outputs are set as Shutter Actuator output pairs in the factory setting.
• In order to use an output pair as Shutter Actuator outputs, open Parameter window Shutter Actua-
The functions can be set individually for each Shutter Actuator output inParameter window Switch Actu-
ator A and the subordinate parameter windows.
If several Shutter Actuator outputs are to be set to the same values, parameterization can be per-
formed in Parameter window Switch Actuator template.
7.10.1 Parameter window Functions
The following settings can be made in the Parameter window Functions:
• Selection of application
• Selection of operating mode
• Enabling of functions
Fig. 47: Parameter window Functions
Parameter
• Application
• Enable function Scenes
• Enable function Safety
• Enable function Time
Note
Note
tor A+B \ Parameter window Functions and select the following option for the parameter Applica-
tion: Switch Actuator .
Note
• Visibility of Switch Actuator
• Visibility of Switch Actuator
• Visibility of Switch Actuator
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 188