Terms - Mitsubishi Electric MELSEC-Q Series User Manual

TERMS

Unless otherwise specified, this manual uses the following terms.
Term
QCPU
LCPU
QSCPU
QnACPU
Control CPU
GX Works2
CC-Link IE Field Network A high-speed and large-capacity open field network that is based on Ethernet (1000BASE-T)
CC-Link
Simple Motion module
Head module
Network module
Intelligent function
module
Ethernet device
Master station
Remote I/O station
Remote device station
Intelligent device station
Servo amplifier
Axis
Slave station
Synchronous
communication device
Asynchronous
communication device
Another term for the MELSEC-Q series CPU module
Another term for the MELSEC-L series CPU module
Another term for the MELSEC-QS series CPU module
Another term for the MELSEC-QnA series CPU module
A CPU module that controls connected I/O modules and intelligent function modules. In a
multiple CPU system, there are multiple CPU modules and each connected module can be
controlled by a different CPU module.
The product name of the software package for the MELSEC programmable controllers
A field network system where data processing for control and information can be
simultaneously performed at high speed.
The abbreviation for the QD77GF16 CC-Link IE Field Network Simple Motion module
The abbreviation for the LJ72GF15-T2 CC-Link IE Field Network head module
A generic term for the following modules:
• CC-Link IE Field Network module
• CC-Link IE Controller Network module
• Ethernet interface module
• MELSECNET/H module
• MELSECNET/10 module
A MELSEC-Q/L series module that has functions other than input and output, such as an A/D
converter module and D/A converter module
A generic term for devices, such as personal computers, that support IP (Internet Protocol)
communications
A station that controls the entire network. This station can perform cyclic transmission and
transient transmission with all stations. Only one master station can be used in a network.
A station that exchanges I/O signals (bit data) with the master station by cyclic transmission
A station that exchanges I/O signals (bit data) and I/O data (word data) with another station by
cyclic transmission. This station responds to a transient transmission request from another
station.
A station that exchanges I/O signals (bit data) and I/O data (word data) with another station by
cyclic transmission. This station responds to a transient transmission request from another
station and also issues a transient transmission request to another station.
Generic term for a drive unit.
Unless specified in particular, indicates the motor driver unit of the sequential command
method which is controlled by the Simple Motion module (belonging to own station).
Another term for a servo amplifier.
A generic term for remote I/O station, remote device station, and intelligent device station
A generic term for a servo amplifier and a slave station set to synchronous communication
mode.
A generic term for a slave station set to other than synchronous communication mode.
Description
A - 23