Mitsubishi Electric MELSEC-Q Series User Manual page 136

POINT
• Parameter setting
The network parameter does not reflect the temporary cancellation of reserved
station specification.
• When the master station is reset or the system is powered off
The disabled reserved station setting is ignored, and the slave station returns to
the status set by the network parameter of the master station.
REMARK
The reserved station setting can also be temporarily disabled/enabled using link
special relays (SBs) and link special registers (SWs) of the master station. (Refer to
Section 11.3.)
(b) Setting a station as a reserved station again
1) Open the "Reserved Station Function Enable" window in the same way as
described in (2) (a).
2) In "Reserved Station List", click the number of the target station. The text
turns red and the background turns light blue.
Only stations not specified as a reserved station can be selected. The
background of available modules is orange.
3) Click the [OK] button.
Chapter 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS
9 - 24