Diagnostic Window - Mitsubishi Electric MELSEC-Q Series User Manual

9.3 Diagnostic Window

This section describes items displayed in the "CC IE Field Diagnostics" window.
(1) Displayed items
Network map
display area
Item
Module
[Change Module...]
Select button
Diagnostics
Destination
Select Station
[Start Monitor]
button
Monitor Status
[Stop Monitor]
button
[Update...] button
Chapter 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS
Displays the Simple Motion module being diagnosed.
When multiple Simple Motion modules are mounted, the target module can be changed.
When multiple Simple Motion modules of the same network number are mounted on the same
base unit, the module with the smallest start I/O number is always diagnosed, regardless of
setting.
Select a station to be diagnosed. If an error occurs in the selected station, "(Error)" is displayed
after the station number.
A station to be diagnosed can be selected by clicking the module icon displayed in the network
map.
Starts monitoring of the CC-Link IE Field Network diagnostics.
Stops monitoring of the CC-Link IE Field Network diagnostics.
Deletes a disconnected station displayed in the network map. The deleted station is displayed in
the "disconnected station monitor area".
9 - 8
Description
Disconnected station
monitor area