Network Settings - Mitsubishi Electric MELSEC-Q Series User Manual

7.3 Network Settings

Set the network number, station number, and other parameters for the Simple Motion module.
(1) Setting procedure
Item
Set the network Select the checkbox to set the network configuration
configuration setting in setting graphically. The setting can be easily
the CC IE Field configured by selecting the module from the module
configuration window list. (Refer to Section 7.4 (1).)
Network Type One master station can be set in a network.
1) Open the setting window.
Project window
[Ethernet/CC IE/MELSECNET]
2) Set parameters in the window.
3) Click the [End] button.
Description
[Parameter] [Network Parameter]
• Do not use the CC IE Field
configuration window to set the
network configuration setting.
(Default: The checkbox is not
checked.)
• Use the CC IE Field configuration
window to set the network
configuration setting.
(The checkbox is checked.)
CC IE Field (Motion Master Station)
(Default: Blank)
7 - 5
Chapter 7 PARAMETER SETTING
Setting range Remark
–
•If the value
outside the
setting range is
set, "Parameter
error (error code:
D302H)" will
occur, and the
Simple Motion
module will start
in offline mode.