Mitsubishi Electric MELSEC-Q Series User Manual page 118

POINT
• Descriptions of icons
Click the [Legend...] button. A brief description of the icon is displayed.
• When multiple Simple Motion modules are mounted on the same base unit
Clicking the [Change Module...] button will change the target module.
• Stations that cannot be selected as a diagnostic target
In the following cases, the status of the corresponding station cannot be checked
using the CC-Link IE Field Network diagnostics.
• The network number of the station differs from those of other stations.
• More than one master station exists in the network.
• The station numbers are overlapped.
Check the error details by directly connecting the supported programming tool to
the slave station in error and opening the "System Monitor" window. (Refer to
Section 12.6.)
Chapter 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS
Click.
9 - 6