Mitsubishi Electric MELSEC-Q Series User Manual page 74

(d) Equal assignment and identical point assignment of link points
[CC IE Field Configuration]
Item
Equally assign link devices to stations with preset conditions.
Equal
Assignment
(1) Start Station
Enter the start station number of stations for which link devices
are equally assigned.
(2) End Station
Enter the end station number of stations for which link devices
are equally assigned.
(3) Start No.
Enter the start number of link devices to be equally assigned.
(4) Total Points Assigned
Enter the total points of link devices to be equally assigned.
Assign the same link device points to all stations.
Identical Point
Assignment
Points entered in this field will be reflected to the "Points" of
"RX/RY Setting".
Half of the points entered in this field will be reflected to the
"Points" of "RWw/RWr Setting".
[Equal Assignment] or [Identical Point Assignment]
Description
7 - 14
Chapter 7 PARAMETER SETTING
Setting range
• Start Station:
0 to the end station number
• End Station:
"Start Station" to the end station
number
• Start No.:
Same values set in "RX/RY
Setting" and "RWw/RWr
Setting"
• Total Points Assigned:
Same values set in "RX/RY
Setting" and "RWw/RWr
Setting"
(Default: Blank)
–
Remark
–
–