Remote Operation - Mitsubishi Electric MELSEC-Q Series User Manual

9.7 Remote Operation

Remote operation (RESET operation) can be executed with GX Works2 for the station
selected on the "CC IE Field Diagnostics" window.
The displayed window varies depending on the station selected. For the operation with a
module other than a Simple Motion module selected, refer to the manual for the module used.
The remote operation supports "RESET" operation only. When the operation other than the
remote operation is executed, "Not support function execution error (error code: D300H)"
occurs. When "RESET" operation is executed, the operation cycle may be over, the
connected slave stations may be disconnected momentary, or a synchronous communication
error may occur. Power on the system again if it happens.
POINT
For details of the remote operation, refer to the user's manual for the CPU module
used.
Chapter 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS
9 - 25