Network Configuration Settings - Mitsubishi Electric MELSEC-Q Series User Manual

7.4 Network Configuration Settings

Set parameters of slave stations (the number of points and assignment of link devices) in the
master station. Set a link scan mode and block data assurance per station as well.
Two methods are available for the network configuration settings as listed in the following
table.
Item
Setting on the
graphical window
(CC IE Field
configuration window)
Setting on the window
in the table format
(Note-1): The network configuration settings can be set only for the master station.
The network configuration can be set while checking the CC-Link IE Field Network
configuration graphically.
Slave stations are added by selecting the model name displayed on the window;
therefore, a setting error in the station type can be prevented.
• Change transmission path method (Refer to Section 7.4 (1) (b).)
Unlike the setting on the window in the table format, the following processes can be
performed.
• Change transmission path method (Refer to Section 7.4 (1) (b).)
• Parameter processing of a slave station (Refer to Section 7.4 (1) (e).)
• Command execution of a slave station (Refer to Section 7.4 (1) (f).)
The CC-Link IE Field Network configuration is set manually. (The station type is also set
manually.)
Unlike the setting on the graphical window (CC IE Field configuration window), the
network configuration is not displayed graphically. (Refer to Section 7.4 (2).)
7 - 8
Chapter 7 PARAMETER SETTING
Description