Mitsubishi Electric MELSEC-Q Series User Manual page 134

(b) Reserving the slave station again
1) In "Network Status", right-click the icon of the station to be reserved again.
Click [Reserved Station Function Disable In Selected Station].
The text background turns light blue. The slave station is reserved again.
POINT
• Parameter setting
The network parameter does not reflect the temporary cancellation of reserved
station specification.
• When the master station is reset or the system is powered off
The disabled reserved station setting is ignored, and the slave station returns to
the status set by the network parameter of the master station.
• Checking the station number of a reserved station
The station number of a reserved station can be checked in the "Reserved
Station Function Enable" window. (Refer to Section 9.6 (2).)
REMARK
The reserved station setting can also be temporarily disabled/enabled using link
special relays (SBs) and link special registers (SWs) of the master station. (Refer to
Section 11.3.)
Chapter 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS
9 - 22