Displaying Data Monitor, Checker Area, Marker And Reference Coordinates - Panasonic MICRO-IMAGECHECKER AX40 User Manual

9.3.2 Displaying Data Monitor, Checker Area, Marker and Reference
Coordinates
The instruction below illustrates how to set the items displayed in RUN mode. You can display the Data
Monitor following the steps below.
Setting procedure
1. Select "ENVIRONMENT" > "RUN mode display setting".
2. Select "Data Monitor".
The submenu is displayed.
3. Select "On".
If you do not want to display each item, choose "Not Display" following the step 3.
• When Data Monitor is displayed in RUN mode, you can change the max./min. value of
numeric calculation results that is quoted to Data Monitor. Refer to page 175.
• Inspection area for a checker, mask area and inspection position are displayed by displaying
the checker.
• Even when the data monitor is set to hide, the data set to output is output to the external
devices in the form which has been set in the [Result Output Settings].
196