2.1 Connecting Peripherals
Be sure to turn the power off before connecting the peripherals to the AX40.
•
Connect only the specified products to the AX40.
•
Be sure to turn the power off before connecting the peripherals to the AX40. Failure to do so
may damage to the device.
•
Arrange the wiring not to apply load on the cable connector joints; otherwise, the
disconnection may be occurred.
•
When unplugging the cable from the connector, be sure to hold it by its plug and avoid
exerting unnecessary force on the cable. Also, do not touch the terminals inside the
connectors. Take care not to allow water and dust to come into the connectors.
8