7.2.3 Creating an Arithmetic Expression
If you want to calculate length by subtracting X-coordinate of the edge which is detected first (Checker 1)
from X-coordinate of the edge which is detected first (Checker 2)-Numeric No.1 (CA01):
1.
Highlight "TOOL" > "Calcu. -Stat.-Output" from the menu bar.
The subwindow for calculation, statistics and output setting is displayed.
2.
Highlight the Num. Calcu. tab.
3.
Highlight "CA01".
The program cell is highlighted.
4.
Check to make sure that the cursor moved to the right cell in the Program column and press
the ENTER key.
The subwindow for program setting is displayed.
The preset arithmetic expressions are shown in the Program area.
The arithmetic expressions are shown in the upper area and a table of the incorporable symbols is
displayed.
5.
Press the ENTER key.
The cursor moves to the table.
6.
Highlight "CHECKER" .
The list of checkers is displayed.
7.
Select "1", which is the number of Gray Edge, in the checker list.
The subwindow to select an object number is displayed.
147