Judgement Output (Jd01 - Jd99); Main Functions; Quotable Data And Operators - Panasonic MICRO-IMAGECHECKER AX40 User Manual

7.3 Judgement Output (JD01 - JD99)

7.3.1 Main Functions

Judging the Inspection Result
The calculation results and checkers are judged totally. Up to 99 of judgement output expressions can be
set. If the expressions return true, the inspection result will be "OK"; otherwise, "NG".
Outputting to the External Device
The judgement results can be output to the external device, such as D1-8, serial port, Ethernet port and
CF card. But, the AX40 can output only up to eight of the results of expressions that are set to "for output".
If the results are judged OK, "1" will be output and if they are judged "NG", "0" will be output.
Total Judgement
The judgement results that are registered as "Total judgement" can be displayed in color during
inspection. Only one of the judgement output expressions can be registered as "Total Judgement".
Conditional Expressions for Saving Images
Conditional Expressions for saving images can be registered. If the results of the registered conditional
expressions are judged "NG", the memory images will be saved in the AX40.

7.3.2 Quotable Data and Operators

List of Quotable Data to Operators
All of the data listed below can be incorporate into judgement output expressions. After performing
calculations, the expressions are displayed with the symbols and numbers 0 - 9.
Reference data
Checker Position/Rotation
Adjustment
Binary Window
Gray Window
Binary Edge
Gray Edge
Feature Extraction
Smart Matching
Contour Matching
Judgement Judgement
Calcu.-Stat. Calcu.- Stat.
-Output -Output
Previous Data of
Calcu.-Stat.-Output
158
Symbol Number Condition for OK judgement
PA 01 to 99 Ability to detect an object.
BW 01 to 99 Max. / Min Area does not exceed the limitations of
OK Judge. Max. /Min.
GW 01 to 99 Gray Average does not exceed the limitations of OK
Judge. Max. /Min.
BE 01 to 99 Ability to detect edges
GE 01 to 99 The number of edges does not exceed the
limitations of OK Judge. Max./Min. (Even if no edge
was detected when the OK Judge. Max./Min. values
include "0", it will be judged "OK".)
FE 01 to 99 Detect. count does not exceed the limitation of
Judge. Max./Min. (Even if detection count is "0"
when the Judge. Max./Min. includes "0", it will be
judged "OK".)
SM 01 to 99 Detect. count at the last phase is equal to the
limitation of detect. count that is set at the last
phase of the sequence.
CM 01 to 99 Ability to detect an object of more than Corr.
JD 01 to 99 Judgement program expressions return true.
CA 01 to 99 Calculation results do not exceed the limitation of
OK Judge. Max/Min.
OCA 01 to 99 Calculation results are within the range of Judge.
Max./Min.