Panasonic MICRO-IMAGECHECKER AX40 User Manual page 82

Changing a Shape of Area
1. Select "Area" from the CHECKER menu.
The Area menu is displayed.
2. Select "Change Shape".
The color of the area will be displayed in yellow and a list of selectable areas is
shown. If you set a mask area, move the ENTER key up or down and display the
area or the mask area you want to change in yellow, then press the ENTER key.
3. Select the shape of area you want to set and press the ENTER key.
Deleting a Mask Area
1. Select "Area" from the CHECKER menu.
The "Area" menu is displayed.
2. Select "Delete Mask".
The mask area is displayed in yellow.
3. Make sure the mask area you want to delete is displayed in yellow and
press the ENTER key.
The mask area you specified is deleted.
Enhanced Color:
Normally areas are displayed in green and mask areas are in blue, but after setting and changing
the area and the mask area, they are shown in yellow. For AX40, we call the areas in yellow as
"enhanced color". You can use this Enhanced Color feature when selecting a mask area to edit.
While an inspection is executed in RUN mode, the area and the mask area of the checker that
were judged "NG" are displayed in red.
74