Specifying Checker Area - Panasonic PV500 User Manual

Displaying Image Full-screen (Full Screen)
This is the setting to display an image full-screen regardless of size of a screen window.
1.
Select "Full Screen".
The image is displayed full-screen. In SETUP menu, the image is displayed in 100% for Quad-speed/ Ultra
Compact camera and in 40% for 2-Mega-pixel camera.
In RUN menu, because the size of screen window can be changed, the aspect ratio of a window might be
different from the ratio of an image. In this case, the image will be displayed adjusting to the smaller side.
Resizing Image in 100% (or 50%) (Optimize Size)
(Only for RUN menu)
The screen window is changed into the size that can display an image in 100% for Quad-speed/ Ultra Compact
camera and in 50% for 2-Mega-pixel camera.
1.
Select "Optimize Size".
The size of the screen window is changed.

3.2.4 Specifying Checker Area

Set an inspection range and a range excluded from inspection with "Area" function. The inspection range is
"Inspection area" and the range excluded from inspection is "Mask area". Area can be set in the following
shapes.
Rectangle
(Plane scan)
Line (Line Scan)
Depending on checker type, some shapes cannot be set.
Specifying an Inspection Area
Rectangle (Plane scan)
1.
Select "Rectangle" or "Plane" from "Change Shape" menu.
2.
Select "Change".
Now you can draw an area.
3.
Move the whole rectangle.
Tilt the ENTER key to move the whole rectangle.
Tilt the ENTER key pressing the SHIFT key to move the area by 10-pixel.
(You can use the SHIFT key also in setting of a start/end point.)
After moving is completed, press the ENTER key.
Ellipse
Broken line
Circle Polygon
(Triangle to 64-gon)
Arc
47