Computer Link; Overview And Communication Specifications - Panasonic MICRO-IMAGECHECKER AX40 User Manual

11.3 Computer Link

11.3.1 Overview and Communication Specifications

This is the mode to communication between a MICRO-IMAGECHECKER and a programmable controller
(PLC) by using the protocol that is used for the communication between PLC and a PC. The device
automatically writes the inspection result to the register specified by the PLC from the top. Therefore, a
communication program to receive data is not necessary.
Communication Specifications
Item
Communication Method
Synchronous Method
Communication Speed
Transmission Code
Transmission Bit Length
Format
Stop Bit
Parity
Flow Control
Delimiter
Available PLCs for Computer Link
Manufacture
Panasonic Electric Works
Co., Ltd.
Mitsubishi Electric
OMRON
Allen-Bradley
Specification
Full duplex
Asynchronous
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200-bit/s (Initial value:
9600)
ASCII
7-bit, 8-bit (Initial value: 8-bit)
1-bit, 2-bit (Initial value: 1-bit)
None/Odd/Even (Initial value: Odd)
None/Soft/Low (Initial value: None)
C
R
Model (series) name
FP series
A series, Q series (Support the special protocol for
MELSEC A-series computer link unit, "Format 4")
FX series
C series, CV series, CS1 series
(*1)
SLC500
Available device
DT
D
D / DM
N7
241