What Are Environment Settings - Panasonic MICRO-IMAGECHECKER AX40 User Manual

9.1 What Are Environment Settings?

Environment Settings refer to the configuration of your AX40. The values specified here are commonly
used by all product types.
A Table of Environment Settings
Item
Initial Camera
settings
Memory 1
Memory 2
Start
Password
Password
Request
Min. Ready
OFF Time
(ms)
Language
RUN mode Display
setting Image
Display
Color
Checker
Pattern
Data
Monitor
Marker
Ref. Point
186
Option Function
Camera 1 To store an image captured with Camera 1 in the Memory
1 and 2.
Camera 1 +2 To store an image captured with Camera 1 in the Memory
1 and Camera 2 in the Memory 2.
Color To inspect an image in extracted color.
Gray To inspect a gray/binary image.
Differential To inspect a differential or differential binary image.
Once To start inspection using input signals from the external
device.
Repeat To start and keep inspection before receiving input signals
from the external device
Up to eight digits To switch from RUN to SETUP mode.
On To request to enter the password when switching from
RUN mode to SETUP mode.
Off To switch from RUN to SETUP mode without entering the
password.
0 to 1000 ms To specify the minimum value while READY signal is off.
This function will be helpful if the external device cannot
(Unit: 10 ms)
detect the ready signal change from OFF to ON due to
high-speed inspection or switching.
English/Japanese To change a display language.
Live-C1 To display a specified image in RUN mode. C1 and C2
stand for Memory 1 and Memory 2 respectively.
Live-C2
Live-C1+C2
Memory-C1
Memory-C2
Memory-C1+C2
Color/Gray/Group To display an image in a specified color in RUN mode.
A-Group H/Group Color: full color image, Gray: Gray or Differential Image,
A to H Group A (A-H): only the extract color is displayed in color,
or binary image is displayed at binary level, Group A - H:
All the colors to which groups A - H have been assigned
are displayed in color.
On/Off To switch On/Off checker area in RUN mode.
On/Off To switch On/Off data monitor in RUN mode.
On/Off To switch On/Off marker in RUN mode.
On/Off To switch On/Off line display of reference coordinates in
RUN Mode.
Ref.
page
49
189
190
189
192
196
196
196
196