Vga Monitor - Panasonic MICRO-IMAGECHECKER AX40 User Manual

1.5 VGA Monitor

No. Part name
1
Power connector
2
RGB input
connector
3
Adjustment
volume
4
Keypad connector Connects the keypad (ANM852**). However, the Keypad connector is available
5
Keypad cable
connector
Check for proper connections before turning the power on.
6
Description
Acceptable input voltage: 24V DC
A connector for RGB input. Connects to the
monitor with the VGA monitor cable -ANMX8331*.
(Connector: Mini D-sub, 15 pins, female)
• 1 - R: Red image signal
• 2 - G: Green image signal
• 3 - B: Blue image signal
• 5, 6, 7, 8, and 10 - GND: Signal ground
• 13 - HS: Horizontal synchronizing signal
• 14 - VS: Vertical synchronizing signal.
The following adjustments are available
BRIGHT Brightness Adjusts the brightness. (Brightness: about 20 to
100%)
V-POS. Vertical Adjusts the screen vertical position (per 16 lines).
Position
H-POS. Horizontal Adjusts the screen horizontal position (per 16 pixels).
Position
PHASE Phase Adjusts the screen flickering.
CONT. Contrast Adjusts the contrast.
only if the monitor is connected to the AX40 with the keypad cable.
Connects the keypad link cable. (Connect one end of the cable to the AX40). Use
the connector in order to connect the keypad to the monitor front.