Panasonic MICRO-IMAGECHECKER AX40 User Manual page 236

Command digit: Fixed (4 Digit)
Communication Command / Description
direction
Sending Command
from External
Device
?? : 01 - 08(To specify Binary Level Group No.)
aaaa : 0001 - 0255 (To specify Binary Level-Max.)
bbbb : 0000 - 0254 (To specify Binary Level-Min.)
Response- At
normal operation
?? : 01 - 08 (Binary Level Group No.)
aaaa : 0001 - 0255 (Binary Level -Max.)
bbbb : 0000 - 0254 (Binary Level-Min.)
Response- Error 1
Cause
•
Response- Error 2
ERROR signal is
output from the
Cause
parallel output port.
•
•
•
To specify the command digit (valid/fixed (4 Digit)), select "ENVIRONMENT" > "Serial Settings" >
"Command Digit" from the menu bar.
228
% T ? ? a a a
Binary Level Group 2 A
Specified number
% T ? ? a a a
% U CR
Command in the unspecified form or not provided was received.
Examples:
C
- %T101250255
C
- %B01 (not provided command)
R
% Z CR
The max. value of binary level specified by a sending command is smaller than the min.
value of binary Level.
The max. value of binary level is equal to the min. value of that.
Max./min. values of binary level specified by sending command is not between 000 and
255.
a b b b b CR
B C D E F
01 02 03 04 05 06 07 08
a b b b b CR
(any other checker number than 01 - 08 was specified.)
R
G H