Installing A Dimm - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Step 5 Remove the 5288 V3 and put it on an ESD desktop. For details, see
Server.
Step 6 Remove the chassis cover. For details, see
Step 7 Remove the supercapacitor if it is installed. For details, see
Supercapacitor (RAID Controller
Step 8 Remove full-height full-length riser cards if they are installed. For details, see
the Riser
Step 9 Remove the air duct. For details, see
Step 10 Open the two fixing clips on the DIMM slot simultaneously. See step (1) in
Figure 7-78 Removing a DIMM
Step 11 Remove the DIMM from the slot. See step (2) in
Step 12 Place the removed DIMM in a memory riser box.
----End

7.40 Installing a DIMM

Install a DIMM to replace the original one or add a new DIMM.
The rules for installing DIMMs are as follows:
l
Issue 26 (2018-11-19)
Card.
The 5288 V3 in dual-CPU configuration provides 16 double data rate 4 (DDR4) DIMM
slots. Each memory riser integrates two memory channels: 0 and 1.
the memory channels.
Copyright © Huawei Technologies Co., Ltd.
7.11 Removing the Chassis
Card).
7.13 Removing the Air
Figure 7-78.
7 Replacing Parts
3.6 Removing the
Cover.
7.33 Removing the
7.19 Removing
Duct.
Figure
Figure 7-79
7-78.
shows
193