NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Figure 6-30 Electric heater position
Step 6 Install and secure the new electric heater by performing
the fan maintenance baffle and close the front door.
Step 7 On the home screen, choose Maint > Wizard Startup, and commissing the
electric heater to check that the heater is normal. Then exit from the wizard
startup mode.
Step 8 On the home screen, choose Maint > Performance Maint to enter the
performance maintenance screen and clear the runtime of the electric heater.
----End
6.7.8.2 Replacing the Electric Heater (Downflow)
Step 1 Tap Shutdown on the display's home screen.
Exercise caution because the device is still energized when it is shut down over the
display.
Step 2 Open the front door and turn off the general switch. For a device that has two
power inputs, turn off the active power switch QF1 and standby power switch
QF2.
Step 3 Remove the fan maintenance baffle plate.
Issue 02 (2020-08-30)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
Step 5
to
Step
3. Install
178