Huawei NetCol8000-C070 User Manual page 110

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Figure 4-9 Setting SNMP communications parameters
Step 2 Set SNMP Version based on site requirements, and then tap Submit.
●
●
Step 3 Set Read Community and Write Community.
1.
2.
Step 4 Add an SNMPv3 user.
Issue 02 (2020-08-30)
If you set SNMP Version to ALL or SNMPv1&v2c, you can set Read
Community and Write Community by performing
If you set SNMP Version to ALL or SNMPv3, you can add SNMPv3 users by
performing Step 4.
Tap the text box after Read Community, as shown in
Community as planned, tap
Figure 4-10 Setting read community
Tap the text box after Write Community, as shown in
Community as planned, tap
Figure 4-11 Setting write community
Copyright © Huawei Technologies Co., Ltd.
Step
Figure
, and then tap Submit.
and then tap Submit.
4 Commissioning
3.
4-10. Set Read
Figure 4-11. Set Write
102